% Copyright 2006 by Till Tantau
%
% This file may be distributed and/or modified
%
% 1. under the LaTeX Project Public License and/or
% 2. under the GNU Free Documentation License.
%
% See the file doc/generic/pgf/licenses/LICENSE for more details.


\section{Calendar Library}

\label{section-calender}

\begin{tikzlibrary}{calendar}
  The library defines the |\calendar| command, which can be used to
  typeset calendars. The command relies on the |\pgfcalendar| command
  from the |pgfcalendar| package, which is loaded automatically.

  The |\calendar| command is quite configurable, allowing you to
  produce all kinds of different calendars.
\end{tikzlibrary}


\subsection{Calendar Command}

The core command for creating calendars in \tikzname\ is the
|\calendar| command. It is available only inside |{tikzpicture}|
environments (similar to, say, the |\draw| command).

\begin{command}{\calendar \meta{calendar specification}|;|}
  The syntax for this command is similar to commands like |\node| or
  |\matrix|. However, it has its complete own parser and only those
  commands described in the following will be recognized, nothing
  else. Note, furthermore, that a \meta{calendar specification} is not
  a path specification, indeed, no path is created for the calendar.

  \medskip
  \textbf{The specification syntax.}
  The \meta{calendar specification} must be a sequence of
  elements, each of which has one of the following structures:
  \begin{itemize}
  \item |[|\meta{options}|]|

    You provide \meta{options} in square brackets as
    in |[red,draw=none]|. These \meta{options} can be any \tikzname\
    option and they apply to the whole calendar. You can provide this
    element multiple times, the effect accumulates.
  \item |(|\meta{name}|)|

    This has the same effect as saying |[name=|\meta{name}|]|. The
    effect of providing a \meta{name} is explained later. Note
    already that \emph{a calendar is not a node} and the \meta{name}
    is \emph{not the name of a node}.
  \item |at (|\meta{coordinate}|)|

    This has the same effect as saying |[at=(|\meta{coordinate}|)]|.
  \item |if (|\meta{date condition}|)| \meta{options or
      commands}\opt{|else|\meta{else options or commands}}

    The effect of such an |if| is explained later.
  \end{itemize}

  At the beginning of every calendar, the following style is used:
  \begin{stylekey}{/tikz/every calendar (initially \normalfont empty)}
    This style is used with every calendar.
  \end{stylekey}

  \medskip
  \textbf{The date range.}
  The overall effect of the |\calendar| command is to execute code for
  each day of a range of dates. This range of dates is set using the
  following option:
  \begin{key}{/tikz/dates=\meta{start date}| to |\meta{end date}}
    This
    option specifies the date range. Both the start and end date are
    specified as described on page~\pageref{calendar-date-format}. In
    short: You can provide ISO-format type dates like |2006-01-02|, you
    can replace the day of month by |last| to refer to the last day of a
    month (so |2006-02-last| is the same as |2006-02-28|), and you can
    add a plus sign followed by a number to specify an offset (so
    |2006-01-01+-1| is the same as |2005-12-31|).
  \end{key}
  It will be useful to fix two pieces of terminology for the following
  descriptions: The |\calendar| command iterates over the dates in the
  range. The \emph{current date} refers to the current date the
  command is processing as it iterates over the dates. For each
  current date code is executed, which will be called the
  \emph{current date code}. The current date code consists of
  different parts, to be detailed later.

  The central part of the current date code is the execution of the
  code |\tikzdaycode|. By default, this code simply produces a node
  whose text is set to the day of month. This means that unless further
  action is taken, all days of a calendar will be put on top of each
  other! To avoid this, you must modify the current date code to shift
  days around appropriately. Predefined arrangements like
  |day list downward| or |week list| do this for you, but you can
  define arrangements yourself. Since defining an arrangement is a bit
  tricky, it is explained only later on. For the time being, let us
  use a predefined arrangement to produce our first calendar:

\begin{codeexample}[]
\tikz \calendar[dates=2000-01-01 to 2000-01-31,week list];
\end{codeexample}

  \medskip
  \textbf{Changing the spacing.}
  In the above calendar, the spacing between the days is determined by
  the numerous options. Most arrangement do not use all of these
  options, but only those that apply naturally.
  \begin{key}{/tikz/day xshift=\meta{dimension} (initially 3.5ex)}
    Specifies the
    horizontal shift between days. This is not the gap between days,
    but the shift between the anchors of their nodes.
\begin{codeexample}[]
\tikz \calendar[dates=2000-01-01 to 2000-01-31,week list,day xshift=3ex];
\end{codeexample}
  \end{key}
  \begin{key}{/tikz/day yshift=\meta{dimension} (initially 3ex)}
    Specifies the
    vertical shift between days. Again, this is the shift between the
    anchors of their nodes.
\begin{codeexample}[]
\tikz \calendar[dates=2000-01-01 to 2000-01-31,week list,day yshift=2ex];
\end{codeexample}
  \end{key}
  \begin{key}{/tikz/month xshift=\meta{dimension}}
    Specifies an additional  horizontal shift between different
    months.
  \end{key}
  \begin{key}{/tikz/month yshift=\meta{dimension}}
    Specifies an
    additional  vertical shift between different months.
\begin{codeexample}[]
\tikz \calendar[dates=2000-01-01 to 2000-02-last,week list,
                month yshift=0pt];
\end{codeexample}
\begin{codeexample}[]
\tikz \calendar[dates=2000-01-01 to 2000-02-last,week list,
                month yshift=1cm];
\end{codeexample}
  \end{key}

  \medskip
  \textbf{Changing the position of the calendar.}
  The calendar is placed in such a way that, normally, the anchor of
  the first day label is at the origin. This can be changed by using
  the |at| option. When you say |at={(1,1)}|, this anchor of the first
  day will lie at coordinate $(1,1)$.

  In general, arrangements will not always place the anchor of the
  first day at the origin. Sometimes, additional spacing rules get in
  the way. There are different ways of addressing this problem: First,
  you can just ignore it. Since calendars are often placed in their own
  |{tikzpicture}| and since their size if computed automatically, the
  exact position of the origin often does not matter at all. Second,
  you can put the calendar inside a node as in
  |...node {\tikz \calendar...}|. This allows you to position the node
  in the normal ways using the node's anchors. Third, you can be very
  clever and use a single-cell matrix. The advantage is that a matrix
  allows you to provide any anchor of any node inside the matrix as an
  anchor for the whole matrix. For example, the following calendar is
  placed in such a way the center of 2000-01-20 lies on the position
  $(2,2)$:
\begin{codeexample}[]
\begin{tikzpicture}
  \draw[help lines] (0,0) grid (3,2);
  \matrix [anchor=cal-2000-01-20.center] at (2,2)
  { \calendar(cal)[dates=2000-01-01 to 2000-01-31,week list]; \\};
\end{tikzpicture}
\end{codeexample}
  Unfortunately, the matrix-base positions, which is the cleanest way,
  isn't as portable as the other approaches (it currently does not
  work with the \textsc{svg} backend for instance).

  \medskip
  \textbf{Changing the appearance of days.}
  As mentioned before, each day in the above calendar is produced by
  an execution of the |\tikzdaycode|. Each time this code is executed,
  the coordinate system will have been setup appropriately to place
  the day of the month correctly. You can change both the code and its
  appearance using the following options.
  \begin{key}{/tikz/day code=\meta{code} (initially \normalfont see below)}
    This option allows you to change the code that is executed for
    each day. The default is to create a node with an appropriate
    name, but you can change this:
\begin{codeexample}[]
\tikz \calendar[dates=2000-01-01 to 2000-01-31,week list,
                day code={\fill[blue] (0,0) circle (2pt);}];
\end{codeexample}
    The default code is the following:
\begin{codeexample}[code only]
\node[name=\pgfcalendarsuggestedname,every day]{\tikzdaytext};
\end{codeexample}
    The first part causes the day nodes to be accessible via the
    following names: If \meta{name} is the name given to the calendar
    via a |name=| option or via the specification element
    |(|\meta{name}|)|, then |\pgfcalendarsuggestedname| will expand to
    \meta{name}|-|\meta{date}, where \meta{date} is the date of the
    day that is currently being processed in ISO format .

    For example, if January 1, 2006 is being processed and the
    calendar has been named |mycal|, then the node containing the |1|
    for this date will be names |mycal-2006-01-01|. You can later
    reference this node.
\begin{codeexample}[]
\begin{tikzpicture}
  \calendar (mycal) [dates=2000-01-01 to 2000-01-31,week list];

  \draw[red] (mycal-2000-01-20) circle (4pt);
\end{tikzpicture}
\end{codeexample}
  \end{key}

  \begin{key}{/tikz/day text=\meta{text}}
    This option changes the setting of the |\tikzdaytext|. By default,
    this macro simply yields the current day of month, but you can
    change it arbitrarily. Here is a silly example:
\begin{codeexample}[]
\tikz \calendar[dates=2000-01-01 to 2000-01-31,week list,
                day text=x];
\end{codeexample}
    More useful examples are based on using the |\%| command. This
    command is redefined inside a |\pgfcalendar| to mean the same as
    |\pgfcalendarshorthand|. (The original meaning of |\%| is lost
    inside the calendar, you need to save if before the calendar if
    you really need it.)

    The |\%| inserts the current day/month/year/day of week in a
    certain format into the text. The first letter following the |\%|
    selects the type (permissible values are |d|, |m|, |y|, |w|), the
    second letter specifies how the value should be displayed (|-|
    means numerically, |=| means numerically with leading
    space, |0| means numerically with leading zeros, |t| means
    textual, and |.| means textual, abbreviated). For example |\%d0|
    gives the day with a leading zero (for more details see
    the description of |\pgfcalendarshorthand| on
    page~\pageref{pgfcalendarshorthand}).

    Let us redefine the |day text| so that it yields the day with a
    leading zero:
\begin{codeexample}[leave comments]
\tikz \calendar[dates=2000-01-01 to 2000-01-31,week list,
                day text=\%d0];
\end{codeexample}
  \end{key}

  \begin{stylekey}{/tikz/every day (initially anchor=base east)}
    This style is executed by the default node code for each day.
    The |every day| style is useful for changing the way days
    look. For example, let us make all days red:
\begin{codeexample}[leave comments]
\tikz[every day/.style=red]
  \calendar[dates=2000-01-01 to 2000-01-31,week list];
\end{codeexample}
  \end{stylekey}


  \medskip
  \textbf{Changing the appearance of month and year labels.}
  In addition to the days of a calendar, labels for the months and
  even years (for really long calendars) can be added. These labels
  are only added once per month or year and this is not done by
  default. Rather, special styles starting with |month label|
  place these labels and make them visible:
\begin{codeexample}[]
\tikz \calendar[dates=2000-01-01 to 2000-02-last,week list,
                month label above centered];
\end{codeexample}

  The following options change the appearance of the month and year
  label:
  \begin{key}{/tikz/month code=\meta{code} (initially \normalfont see below)}
    This option allows you to specify what the macro |\tikzmonthcode|
    should expand to.

    By default, the |\tikzmonthcode| it is set to
\begin{codeexample}[code only]
\node[every month]{\tikzmonthtext};
\end{codeexample}
    Note that this node is not named by default.
  \end{key}

  \begin{key}{/tikz/month text=\meta{text}}
    This option allows you to change the macro |\tikzmonthtext|. By
    default, the month text is a long textual presentation of the
    current month being typeset.
\begin{codeexample}[leave comments]
\tikz \calendar[dates=2000-01-01 to 2000-01-31,week list,
                month label above centered,
                month text=\textcolor{red}{\%mt} \%y-];
\end{codeexample}
  \end{key}

  \begin{stylekey}{/tikz/every month (initially \normalfont empty)}
    This style can be used to change the
    appearance of month labels.
  \end{stylekey}

  \begin{key}{/tikz/year code=\meta{code}}
    Works like |month code|, only for years.
  \end{key}

  \begin{key}{/tikz/year text=\meta{text}}
    Works like |month text|, only for years.
  \end{key}


  \begin{key}{/tikz/every year}
    Works like |every month|, only for years.
  \end{key}

  \medskip
  \textbf{Date ifs.}
  Much of the power of the |\calendar| command comes from the use of
  conditionals. There are two equivalent way of specifying such a
  conditional. First, you can add the text
  |if (|\meta{conditions}|) |\meta{code or options} to your
  \meta{calendar specification}, possibly followed by |else|\meta{else
    code or options}. You can have multiple such conditionals (but
  you cannot nest them in this simple manner). The second way is to
  use the following option:
  \begin{key}{/tikz/if=|(|\meta{conditions}|)|\meta{code or
        options}\opt{|else|\meta{else code or options}}}
    This option has
    the same effect as giving a corresponding if in the \meta{calendar
      specification}.  The option is mostly useful for use in the
    |every calendar| style, where you cannot provide if conditionals
    otherwise.
  \end{key}
  Now, regardless of how you specify a conditional, it has the
  following effect (individually and independently for each date in
  the calendar):
  \begin{enumerate}
  \item It is checked whether the current date is one of the
    possibilities listed in \meta{conditions}. An example of such a
    condition is |Sunday|. Thus, when you write
    |if (Saturday,Sunday) {foo}|,  then |foo| will be executed for
    every day in the calendar that is a Saturday \emph{or} a Sunday.

    The command |\ifdate| and, thereby, |\pgfcalendarifdate| are used
    to evaluate the \meta{conditions}, see
    page~\pageref{pgfcalendarifdate} for a complete list of possible
    tests. The most useful tests are: Tests like |Monday| and so on,
    |workday| for the days Monday to Friday, |weekend| for Saturday
    and Sunday, |equals| for testing whether the current date equals a
    given date, |at least| and  |at least| for comparing the current
    date with a given date.
  \item If the date passes the check, the \meta{code or options} is
    evaluated in a manner to be described in a moment; if the date
    fails, the \meta{else code or options} is evaluated, if present.

    The \meta{code or options} can either be some code. This is
    indicated by surrounding the code with curly braces. It can also
    be a list of \tikzname\ options. This is indicated by surrounding
    the options with square brackets. For example in the date test
    |if (Sunday) {\draw...} else {\fill...}| there are two pieces of
    code involved. By comparison, |if (Sunday) [red] else [green]|
    involves two options.

    If \meta{code or options} is code, it is simply executed (for the
    current day). If it is a list of options, these options are passed
    to a scope surrounding the current date.
  \end{enumerate}
  Let us now have a look at some examples. First, we use a conditional
  to make all Sundays red.
\begin{codeexample}[]
\tikz
  \calendar
    [dates=2000-01-01 to 2000-01-31,week list]
    if (Sunday) [red];
\end{codeexample}
  Next, let us do something on a specific date:
\begin{codeexample}[]
\tikz
  \calendar
    [dates=2000-01-01 to 2000-01-31,week list]
    if (Sunday)            [red]
    if (equals=2000-01-20) {\draw (0,0) circle (8pt);};
\end{codeexample}
  You might wonder why the circle seems to be ``off'' the
  date. Actually, it is centered on the date, it is just that the date
  label uses the |base east| anchor, which shifts the label up and
  right. To overcome this problem we can change the anchor:
\begin{codeexample}[]
\tikz [every day/.style={anchor=mid}]
  \calendar
    [dates=2000-01-01 to 2000-01-31,week list]
    if (Sunday)            [red]
    if (equals=2000-01-20) {\draw (0,0) circle (8pt);};
\end{codeexample}
  However, the single day dates are now no longer aligned
  correctly. For this, we can change the day text to |\%d=|,
  which adds a space at the beginning of single day
  text.

  In the following, more technical information is covered. Most
  readers may wish to skip it.

  \medskip
  \textbf{The current date code.}
  As mentioned earlier, for each date in the calendar the current date
  code is executed. It is the job of this code to shift around date
  nodes, to render the date nodes, to draw the month labels and to do
  all other stuff that is necessary to draw a calendar.

  The current date code consists of the following parts, in this order:
  \begin{enumerate}
  \item The before-scope code.
  \item A scope is opened.
  \item The at-begin-scope code.
  \item All date-ifs from the \meta{calendar specification} are
    executed.
  \item The at-end-scope code.
  \item The scope is closed.
  \item The after-scope code.
  \end{enumerate}
  All of the codes mentioned above can be changed using appropriate
  options, see below. In case you wonder why so many are needed, the
  reason is that the current date code as a whole is not
  surrounded by a scope or \TeX\ group. This means that code executed
  in the before-scope code and in the after-scope code has an effect
  on all following days. For example, if the after-scope code modifies
  the transformation matrix by shifting everything downward, all
  following days will be shifted downward. If each day does this, you
  get a list of days, one below the other.

  However, you do not always want code to have an effect on everything
  that follows. For instance, if a day has the date-if
  |if (Sunday) [red]|, we only want this Sunday to red, not all
  following days also. Similarly, sometimes it is easier to compute
  the position of a day relative to a fixed origin and we do not want
  any modifications of the transformation matrix to have an effect
  outside the scope.

  By cleverly adjusting the different codes, all sorts of different
  day arrangements are possible.

  \begin{key}{/tikz/execute before day scope=\meta{code}}
    The \meta{code} is executed before everything else for each
    date. Multiple
    calls of this option have an accumulative effect. Thus, if you use
    this option twice, the code from the first use is used first for
    each day, followed by the code given the second time.
  \end{key}
  \begin{key}{/tikz/execute at begin day scope=\meta{code}}
    This code is execute before everything else inside the scope of
    the current date. Again, the effect is accumulative.
  \end{key}
  \begin{key}{/tikz/execute at end day scope=\meta{code}}
    This code is executed just before the day scope is
    closed. The effect is also accumulative, however, in reverse
    order. This is useful to pair, say, |\scope| and |\endscope|
    commands in at-begin- and at-end-code.
  \end{key}
  \begin{key}{/tikz/execute after day scope=\meta{code}}
    This is executed at the very end of the current date, outside the
    scope. The accumulation is also in reverse.
  \end{key}
\end{command}


In the rest of the following subsections we have a look at how the
different scope codes can be used to create different calendar
arrangements.


\subsubsection{Creating a Simple List of Days}

We start with a list the days of the calendar, one day below the
other. For this, we simply shift the coordinate system downward at the
end of the code for each day. This shift must be \emph{outside} the
day scope as we want day shifts to accumulate. Thus, we use the
following code:
\begin{codeexample}[]
\tikz
  \calendar [dates=2000-01-01 to 2000-01-08,
             execute after day scope=
               {\pgftransformyshift{-1em}}];
\end{codeexample}
Clearly, we can use this approach to create day lists going up,
down, right, left, or even diagonally.


\subsubsection{Adding a Month Label}

We now want to add a month label to the left of the beginning of each
month. The idea is to do two things:
\begin{enumerate}
\item We add code that is executed only on the first of each month.
\item The code is executed before the actual day is rendered. This
  ensures that options applying to the days do not affect the month
  rendering.
\end{enumerate}
We have two options where we should add the month code: Either we add
it at the beginning of the day scope or before. Either will work fine,
but it might be safer to put the code inside the scope to ensure that
settings to not inadvertently ``leak outside.''
\begin{codeexample}[]
\tikz
  \calendar
    [dates=2000-01-01 to 2000-01-08,
     execute after day scope={\pgftransformyshift{-1em}},
     execute at begin day scope=
       {\ifdate{day of month=1}{\tikzmonthcode}{}},
     every month/.append style={anchor=base east,xshift=-2em}];
\end{codeexample}

In the above code we used the |\ifdate|\marg{condition}\marg{then
  code}\marg{else code} command, which is described on
page~\pageref{ifdate} in detail and which has much the same effect as
|if (|\meta{condition}|)|\marg{then code}| else |\marg{else code}, but
works in normal code.


\subsubsection{Creating a Week List Arrangement}

Let us now address a more complicated arrangement: A week list. In
this arrangement there is line for each week. The horizontal placement
of the days is thus that all Mondays lie below each other, likewise
for all Tuesdays, and so on.

In order to typeset this arrangement, we can use the following
approach: The origin of the coordinate system rests at the anchor for
the Monday of each week. That means that at the end of each week the
origin is moved downward one line. On all other days, the origin at
the end of the day code is the same as at the beginning. To position
each day correctly, we use code inside and at the beginning of the day
scope to horizontally shift the day according to its day of week.
\begin{codeexample}[]
\tikz
  \calendar
    [dates=2000-01-01 to 2000-01-20,
     % each day is shifted right according to the day of week
     execute at begin day scope=
       {\pgftransformxshift{\pgfcalendarcurrentweekday em}},
     % after each week, the origin is shifted downward:
     execute after day scope=
       {\ifdate{Sunday}{\pgftransformyshift{-1em}}{}}];
\end{codeexample}


\subsubsection{Creating a Month List Arrangement}

For another example, let us create an arrangement that contains one
line for each month. This is easy enough to do as for weeks, unless we
add the following requirement: Again, we want all days in a column to
have the same day of week. Since months start on different days of
week, this means that each row has to have an individual offset.

One possible way is to use the following approach: After each month
(or at the beginning of each month) we advance the vertical position
of the offset by one line. For horizontal placement, inside the day
scope we locally shift the day by its day of month. Furthermore, we
must additionally shift the day to ensure that the first day of the
month lies on the correct day of week column. For this, we remember
this day of week the first time we see it.
\begin{codeexample}[]
\newcount\mycount
\tikz
  \calendar
    [dates=2000-01-01 to 2000-02-last,
     execute before day scope=
     {
       \ifdate{day of month=1} {
         % Remember the weekday of first day of month
         \mycount=\pgfcalendarcurrentweekday
         % Shift downward
         \pgftransformyshift{-1em}
       }{}
     },
     execute at begin day scope=
     {
       % each day is shifted right according to the day of month
       \pgftransformxshift{\pgfcalendarcurrentday em}
       % and additionally according to the weekday of the first
       \pgftransformxshift{\the\mycount em}
     }];
\end{codeexample}


\subsection{Arrangements}

An \emph{arrangement} specifies how the days of calendar are arranged
on the page. The calendar library defines a number of predefined
arrangements.

We start with arrangements in which the days are listed in a long
line.

\begin{stylekey}{/tikz/day list downward}
  This style causes the days of a month to be typeset one below the
  other. The shift between days is given by |day yshift|. Between
  month an additional shift of |month yshift| is added.
\begin{codeexample}[]
\tikz
  \calendar [dates=2000-01-28 to 2000-02-03,
             day list downward,month yshift=1em];
\end{codeexample}
\end{stylekey}

\begin{stylekey}{/tikz/day list upward}
  works as above, only the list grows upward instead of downward.
\begin{codeexample}[]
\tikz
  \calendar [dates=2000-01-28 to 2000-02-03,
             day list upward,month yshift=1em];
\end{codeexample}
\end{stylekey}

\begin{stylekey}{/tikz/day list right}
  This style also works as before, but the list of days grows to the
  right. Instead of |day yshift| and |month yshift|, the values of
  |day xshift| and |month xshift| are used.
\begin{codeexample}[]
\tikz
  \calendar [dates=2000-01-28 to 2000-02-03,
             day list right,month xshift=1em];
\end{codeexample}
\end{stylekey}

\begin{stylekey}{/tikz/day list left}
  As above, but the list grows left.
\end{stylekey}

The next arrangement lists days by the week.

\begin{stylekey}{/tikz/week list}
  This style creates one row for each week in the range. The value
  of |day xshift| is used for the distance between days in each week
  row, the value of |day yshift| is used for the distance between
  rows. In both cases, ``distance''  refers to the distance between
  the anchors of the nodes of the days (or, more generally, the
  distance between the origins of the little pictures created for each
  day).

  The days inside each week are shifted such that Monday is always
  at the first position (to change this, you need to copy and then
  modify the code appropriately). If the date range does not start on
  a Monday, the first line will not start in the first column, but
  rather in the column appropriate for the first date in the range.

  At the beginning of each month (except for the first month in the
  range) an additional vertical space of |month yshift| is added. If
  this is set to |0pt| you get a continuous list of days.
\begin{codeexample}[]
\tikz
  \calendar [dates=2000-01-01 to 2000-02-last,week list];
\end{codeexample}
\begin{codeexample}[]
\tikz
  \calendar [dates=2000-01-01 to 2000-02-last,week list,
             month yshift=0pt];
\end{codeexample}
\end{stylekey}

The following arrangement gives a very compact view of a whole year.
\begin{stylekey}{/tikz/month list}
  In this arrangement there is a row for each month. As for the
  |week list|, the |day xshift| is used for the horizontal distance.
  For the vertical shift, |month yshift| is used.

  In each row, all days of the month are listed alongside each
  other. However, it is once more ensured that days in each column lie
  on the same day of week. Thus, the very first column contains only
  Mondays. If a month does not start with a Monday, its days are
  shifted to the right such that the days lie on the correct columns.
\begin{codeexample}[]
\sffamily\scriptsize
\tikz
  \calendar [dates=2000-01-01 to 2000-12-31,
             month list,month label left,month yshift=1.25em]
            if (Sunday) [black!50];
\end{codeexample}
\end{stylekey}

\subsection{Month Labels}

For many calendars you may wish to add a labels to each month. We have
already covered how month nodes are created and rendered in the
description of the |\calendar| command: use |month text|,
|every month|, and also |month code| (if necessary) to change the
appearance of the month labels.

What we have not yet covered is where these labels are placed. By
default, they are not placed at all as there is no good ``default
position'' for them. Instead, you can use one of the following options
to specify a position for the labels:
\begin{stylekey}{/tikz/month label left}
  Places the month label to the left of the first day of the
  month. (For |week list| and |month list| where a month does not
  start on a Monday, the position is chosen ``as if'' the month had
  started on a Monday --  which is usually exactly what you want.)
\begin{codeexample}[]
\tikz
  \calendar [dates=2000-01-28 to 2000-02-03,
             day list downward,month yshift=1em,
             month label left];
\end{codeexample}
\end{stylekey}
\begin{stylekey}{/tikz/month label left vertical}
  This style works like the above style, only the label is rotated
  counterclockwise by 90 degrees.
\begin{codeexample}[]
\tikz
  \calendar [dates=2000-01-28 to 2000-02-03,
             day list downward,month yshift=1em,
             month label left vertical];
\end{codeexample}
\end{stylekey}
\begin{stylekey}{/tikz/month label right}
  This style places the month label to the right of the row in which
  the first day of the month lies. This means that for a day list the
  label is to the right of the first day, for a week list it is to the
  right of the first week, and for a month list it is to the right of
  the whole month.
\begin{codeexample}[]
\tikz
  \calendar [dates=2000-01-28 to 2000-02-03,
             day list downward,month yshift=1em,
             month label right];
\end{codeexample}
\end{stylekey}
\begin{stylekey}{/tikz/month label right vertical}
  Works as above, only the label is rotated clockwise by 90 degrees.
\begin{codeexample}[]
\tikz
  \calendar [dates=2000-01-28 to 2000-02-03,
             day list downward,month yshift=1em,
             month label right vertical];
\end{codeexample}
\end{stylekey}

\begin{stylekey}{/tikz/month label above left}
  This style places the month label above of the row of the first day,
  flushed left to the leftmost column. The amount by which the label
  is raised is fixed to |1.25em|; use the |yshift| option with the
  month node to modify this.
\begin{codeexample}[]
\tikz
  \calendar [dates=2000-01-28 to 2000-02-03,
             day list right,month xshift=1em,
             month label above left];
\end{codeexample}
\begin{codeexample}[]
\tikz
  \calendar [dates=2000-01-20 to 2000-02-10,
             week list,month label above left];
\end{codeexample}
\end{stylekey}

\begin{stylekey}{/tikz/month label above centered}
  works as above, only the label is centered above the row containing
  the first day.
\begin{codeexample}[]
\tikz
  \calendar [dates=2000-02-01 to 2000-02-last,
             day list right,month label above centered];
\end{codeexample}
\begin{codeexample}[]
\tikz
  \calendar [dates=2000-01-20 to 2000-02-10,
             week list,month label above centered];
\end{codeexample}
\end{stylekey}

\begin{stylekey}{/tikz/month label above right}
  works as above, but flushed right
\begin{codeexample}[]
\tikz
  \calendar [dates=2000-01-20 to 2000-02-10,
             week list,month label above right];
\end{codeexample}
\end{stylekey}

\begin{stylekey}{/tikz/month label below left}
  Works like |month label above left|, only the label is placed below
  the row. This placement is not really useful with the |week list|
  arrangement, but rather with the |day list right| or |month list|
  arrangement.
\begin{codeexample}[]
\tikz
  \calendar [dates=2000-02-01 to 2000-02-last,
             day list right,month label below left];
\end{codeexample}
\end{stylekey}

\begin{stylekey}{/tikz/month label below centered}
  Works like |month label above centered|, only below.
\begin{codeexample}[]
\tikz
  \calendar [dates=2000-02-01 to 2000-02-last,
             day list right,month label below centered];
\end{codeexample}
\end{stylekey}



\subsection{Examples}

In the following, some example calendars are shown that come either
from real applications or are just nice to look at.

Let us start with a year-2100-countdown, in which we cross out dates
as we approach the big celebration. For
this, we set the shape to |strike out| for these dates.

\begin{codeexample}[leave comments]
\begin{tikzpicture}
  \calendar
  [
    dates=2099-12-01 to 2100-01-last,
    week list,inner sep=2pt,month label above centered,
    month text=\%mt \%y0
  ]
  if (at most=2099-12-29) [nodes={strike out,draw}]
  if (weekend)            [black!50,nodes={draw=none}]
  ;
\end{tikzpicture}
\end{codeexample}

The next calendar shows a deadline, which is 10 days in the future
from the current date. The last three days before the deadline are in
red, because we really should be done by then. All days on which we
can no longer work on the project are crossed out.

\begin{codeexample}[leave comments]
\begin{tikzpicture}
  \calendar
  [
    dates=\year-\month-\day+-25 to \year-\month-\day+25,
    week list,inner sep=2pt,month label above centered,
    month text=\textit{\%mt \%y0}
  ]
  if (at least=\year-\month-\day) {}
    else [nodes={strike out,draw}]
  if (at most=\year-\month-\day+7)
    [green!50!black]
  if (between=\year-\month-\day+8 and \year-\month-\day+10)
    [red]
  if (Sunday)
    [gray,nodes={draw=none}]
  ;
\end{tikzpicture}
\end{codeexample}

The following example is a futuristic calendar that is all about circles:

\begin{codeexample}[]
\sffamily

\colorlet{winter}{blue}
\colorlet{spring}{green!60!black}
\colorlet{summer}{orange}
\colorlet{fall}{red}

% A counter, since TikZ is not clever enough (yet) to handle
% arbitrary angle systems.
\newcount\mycount

\begin{tikzpicture}
  [transform shape,
   every day/.style={anchor=mid,font=\fontsize{6}{6}\selectfont}]
  \node{\normalsize\the\year};
  \foreach \month/\monthcolor in
    {1/winter,2/winter,3/spring,4/spring,5/spring,6/summer,
     7/summer,8/summer,9/fall,10/fall,11/fall,12/winter}
  {
    % Computer angle:
    \mycount=\month
    \advance\mycount by -1
    \multiply\mycount by 30
    \advance\mycount by -90

    % The actual calendar
    \calendar at (\the\mycount:6.4cm)
    [
      dates=\the\year-\month-01 to \the\year-\month-last,
    ]
    if (day of month=1) {\color{\monthcolor}\tikzmonthcode}
    if (Sunday) [red]
    if (all)
    {
      % Again, compute angle
      \mycount=1
      \advance\mycount by -\pgfcalendarcurrentday
      \multiply\mycount by 11
      \advance\mycount by 90
      \pgftransformshift{\pgfpointpolar{\mycount}{1.4cm}}
    };
  }
\end{tikzpicture}
\end{codeexample}

Next, lets us have a whole year in a tight column:
\begin{codeexample}[leave comments]
\begin{tikzpicture}
  \small\sffamily
  \colorlet{darkgreen}{green!50!black}
  \calendar[dates=\year-01-01 to \year-12-31,week list,
            month label left,month yshift=0pt,
            month text=\textcolor{darkgreen}{\%m0}]
           if (Sunday) [black!50];
\end{tikzpicture}
\end{codeexample}


%%% Local Variables:
%%% mode: latex
%%% TeX-master: "pgfmanual-pdftex-version"
%%% End: